Synapse DMXpro LP510-001, Руководство пользователя, Страница: 11 / 21

Hardware Setup SNAP DMX User Guide 11
Setting a Value in Configuration Mode
Each of the six configuration modes (Universe, the four Security Keys and Mesh Hop)
are set to a value from zero to 15. By default, the Universe is set to 1, and the other five
values are set to 0 (zero).
While in one of the Configuration Modes, you can set its value by using brief clicks of
the Mode button. For each mode you assign a value from 0 – 15. This is accomplished by
briefly clicking the Mode button to step through each number before cycling back to 0
(zero). The B & C LEDs display different color codes to indicate which number you have
currently set.
Note: You must unplug the USB power cable in order to save and reboot the new setting and
return to normal operation.
Setting LED B LED C
0 OFF OFF
1 OFF GREEN
2 OFF RED
3 OFF AMBER
4 GREEN OFF
5 GREEN GREEN
6 GREEN RED
7 GREEN AMBER
8 RED OFF
9 RED GREEN
10 RED RED
11 RED AMBER
12 AMBER OFF
13 AMBER GREEN
14 AMBER RED
15 AMBER AMBER
Figure 2: LED B & C Color Chart
Once you have made all the configuration changes you desire, power off the SNAP DMX
adapter by unplugging the USB cord and plugging it back in. This process saves the
changes and reboots the adapter.