Synapse DDP84, Инструкция по установке и эксплуатации

Страница: 21 / 37

21
PROLOGIC CONTROL
The lines and blocks that are marked red in the following schematic are
done by this chapter’s settings:
Meta_source
This item lets you select which metadata source you want to use for pro
logic encoding, external (
External_MD
, using program 1) or internal
(
Internal_MD
, using Metadata set A). Default is
External_MD
.
For more information about Dolby Metadata, please read the metadata
guide which you can find on the website of Dolby
(
http://www.dolby.com/assets/pdf/tech_library/18_Metadata.Guide.pdf )
Center_mix
This setting indicates the level shift applied to the center channel when
adding to the left and right outputs.
0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB, -7.5dB, -9.2dB and – inf dB
(meaning muted). Default is 0dB.
Surround_mix
This setting indicates the level shift applied to the surround channels when
adding to the left and right outputs.
0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB, -7.5dB, -9.2dB and – inf dB
(meaning muted). Default is 0dB.
LFE
The status of the LFE Channel parameter indicates whether an LFE
Channel (Low Frequency Effects channel) is present within the bitstream.
Default is
Disable
.