SimplySNAP BMS Gateway/ProtoAir Start-up Guide
Page 20 of 52
6.1.3 Update W i-Fi Client Settings
From the Network Settings page, scroll down to the Wi-Fi Client section. To change the Wi-Fi client settings,
follow these instructions:
•
Set the Wi-Fi Status to ENABLED for the ProtoAir to communicate with other devices via Wi-Fi.
•
Enter the Wi-Fi SSID and Wi-Fi Password for the local wireless access point.
•
Enable DHCP to automatically assign all Wi-Fi Client network settings or manually modify the
setting using the fields immediately below (IP Address, Network, etc.).
NOTE: If connected to a router, set the IP gateway to the same IP Address as the router.
•
Click Save, then click on Refresh to restart the gateway and activate the new Wi-Fi settings.
•
Go to Common settings
) to set the Primary Connection to Wi-Fi Client.
Figure 11: Wi-Fi Client Network Settings
