manualshive.com logo in svg

Synapius ECS 20 Series, Руководство пользователя и инструкция по установке

Поделиться
Скачать
Synapius ECS 20 Series Скачать руководство пользователя страница 25

8

Resetting the master code using the PUC code

If the master code is lost or forgotten you can perform a master code reset. To reset your master code
to the factory preset (code 0000) you need the PUC code exclusively assigned to your serial number of 
your ECS. This PUC is provided at the moment of product registration and sent to you by e-mail or
provided by your supplier.
The PUC consist of a number combination of eight digits. To use this follow the next procedure.

To clear existing keystrokes

xxxxxxxx Enter the PUC code

Use the CE button to avoid confusion with possible user pin codes

xxxxxxxx enter again the PUC code

Use the CE button to avoid confusion with possible user pin codes

The green LED will flash twice. The master code of your device is now reset to 0000.
Now you can follow the procedure to program your own desired master code.

If the master code and the PUC as well has been lost submit a support form including the serial
number of the device on the Internet site http://www.synapius.com/index.php?support

support request

 The cost for this PUC code service will be charged.

-

Electronic Code Switches

Содержание ECS 20 Series






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды