Synapius ECS 20 Series, Руководство пользователя и инструкция по установке

Страница: 24 / 37

ON/OFF switching without pincodes
It might be useful to set the ECS as a simple ON/OFF switch during trouble shooting or repair.
All the safety and auto turn off functions are fully functioning in this mode.
To change to a simple switch:
To clear existing keystrokes
xxxxxxxx Enter the master code
Confirm
4 enter code 4 to set into simple ON/OFF switch
Confirm
If in this mode an emergency signal occurs the E-stop procedure mode 2 is active. That means that
restarting must be evoked by the master code followed by the desired E-stop mode (0,1 or 2).
To return to normal mode follow the next procedures:
To clear existing keystrokes
xxxxxxxx enter the master code
Confirm
0, 1 or 2 Enter the E-stop mode you require (see E-stop mode)
Confirm
Electronic Code Switches
Do not forget to restore the ECS to normal functioning.
If you changed the switch off delay or other settings restore
this also.
TEST IF ALL WILL BE RESTORED CORRECTLY!
Update the user default if necessary.