6
Care and Cleaning
1) Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Troubleshooting Chart
Problem
Cause
Solution
Finish is spotting.
Elements in water supply may cause
water staining on finish.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
(800)796-6667
■
Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3051 REV 0 09/25/14
1) Turn shower handle counterclockwise approximately
1/4 turn to put valve in cold position.
2) Turn shower handle counterclockwise approximately
1/2 turn to put valve in warm position.
3) Turn shower handle counterclockwise approximately
3/4 turn to put valve in hot position.
1) Diverter handle facing straight down is for diverter
function 1.
2)
4130-TRM & 4105-TMRM:
Turn diverter handle
counterclockwise one full revolution for diverter
function 2.
4106-TRM:
Turn diverter handle counterclockwise 1/4
turn for diverter function 2.
3)
4106-TRM:
Turn diverter handle counterclockwise 3/4
turn for diverter function 3.
Operation
Temperature Control
Diverter Control
5205-TRM
5206-TRM
