5
Installation
Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
(800)796-6667
■
Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3051 REV 0 09/25/14
8) Press tab to remove mounting
plate (M2) from cradle mount
cover (M1).
Note:
Mounting plate (M2) center
tabs must be horizontal for removal.
9) Place mounting plate (M2) in
position, mark and drill 1/8" pilot
holes into stud.
Option:
Place mounting plate (M2) in
position, mark and drill 3/16" holes
into wall. Install anchors.
10) Install mounting plate (M2).
Secure with two screws (N).
Replace cradle mount cover (M1).
Note:
Mounting plate (M2) center
tabs must be horizontal for
installation.
11) Attach cradle arm (P) and
washer (O) to cradle mount (M).
Secure with set screw (Q).
12) Attach shower arm (E) and
flange (F) to vertical shower pipe
turning clockwise to tighten.
13) Install shower head (D) to shower
arm (E) turning clockwise to
tighten.
14) Attach large end of hand
shower hose (Z) to hand
shower head (X). Attach small
end of hand shower hose (Z)
and gasket to in-line vacuum
breaker (A). Connect in-line
vacuum breaker to wall
elbow (B). Turn clockwise
to tighten.
2
1
M1
M2
1
3
2
M2
1
3
2
N
M2
M2
M1
3
1
4
2
Z
X
A
Z
B
1
2
D
E
1
2
E
F
1
2
M2
1
2
M
Q
O
P
