4
Installation
Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
(800)796-6667
■
Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3051 REV 0 09/25/14
Note:
For valve body installation, please
see valve body installation guides.
1) Install small plastic mounting
plate (L) to diverter valve
(4106-TRM diverter valve =
4-460E-BODY, 4105-TRM diverter
valve = 4-458E-BODY) and large
plastic mounting plate (W) to
shower valve (4000-BODY).
Secure small plasting mounting
plate with two screws (K) and large
plastic mounting screws with two
screws (V).
2) Attach diverter escutcheon (J) to
small plastic mounting plate (L).
Note:
Tabs should snap into place.
3) Attach shower escutcheon (U) to
large plastic mounting plate (W).
Note:
Tabs should snap into place.
4) Install shower dome cover (T)
and diverter dome cover (I) to
valves by turning clockwise.
5) Install diverter handle (G)
(4105-TRM and 4106-TRM only)
and shower handle (R) to valves.
Secure handles by tightening set
screws (H, S).
6) Install tub spout
(Y) to pipe fitting.
Turn clockwise to secure.
7) Install wall elbow (B) and flange (C)
to recessed pipe fitting. Turn elbow
clockwise to tighten
1
1
2
L
K
V
W
J
L
U
W
1
1
2
I
T
1
1
2
G
R
S
H
1
2
Y
1
2
B
C
