Page 3
Shower Trim Installation
1)
Attach dome cover
2)
Apply dome gasket
3)
Attach escutcheon
4)
Attach handle
5)
Attach showerhead
protective
tape
2
1
rear view
■ Check for leaks around valve
assembly and all pipe fittings.
9)
Set temperature limit stop
screw
The
temperature limit stop screw
limits valve handle from being
turned to maximum position
resulting in excessive hot water
discharge temperatures.
■ Place handle on control spindle
and open valve to maximum
desired temperature.
■ Turn stop screw clockwise until
it seats. Reference Figure 3.
Warning:
Failure to
adjust the
Temp
limit stop screw
properly may result
in serious scalding.
Tub & Shower Operation
Volume control handle
ON OFF
Care and Cleaning
Clean finished area by using mild
soap and water or a non-abrasive
cleaner and then quickly rinse. A
non-abrasive wax may be used to
preserve finish area.
ON OFF