manualshive.com logo in svg

Symmetricom TM7000, Руководство пользователя

Поделиться
Скачать
Symmetricom TM7000 Скачать руководство пользователя страница 44

 

 

OPERATION

 

3.7.16  SELECTING GENERATOR RE/GEN (MULTI-CODE SERIAL ENCODER) 
 

The RE/GENERATE menu (on the SELECT GENERATOR OUTPUTS menu) is used to select 
the output code for rear panel BNC connectors J12 (AC Code Output from Multicode) and J4 
(DC Code Output from Multicode), regardless of whether the time source for the code is the 
generator or the translator. This Multi-code Serial Encoder is an integral part of the basic 
TM7000. This encoder generates IRIG A, IRIG B, IRIG G, NASA 36, XR3, 2137 or AN/GSQ-
53 (250 Hz) as selected by the Output Code Menu as shown in Figure 3.7.16.1. Codes may be 
“re/generated” from the translator at multiple speeds. 

Output Code Menu 

Figure 3.7.16.1 

       Select   Desired   Channel    N  Output   Code 

IRIG   A--B--G    NASA  36    XR3    2137   ANG 

 

NOTE

a. 

“N” is the current Encoder channel number. Advance with the NEXT button. 

 
b. 

Select the desired output code with a button directly under the menu item. 

 
The TM7000 has a Multi-code Serial Encoder incorporated into the basic STCG.  It’s channel 
number is fixed at “1”.  The channel number is like an address.  If an additional, optional, Multi-
code Serial Encoder is installed in the option area, its channel number is selectable using DIP 
switchs on the card.  Its channel (address) number can be accessed from the above menu using 
the NEXT button under the LCD display. Only installed channel numbers are displayed. 
Multiple encoders may be assigned the same channel number during installation, or each encoder 
may be assigned a different channel number. Channels are numbered in “hex” from 1 to C. All 
other numbers are illegal. Set-ups are stored and remembered through power outages. 

 

The term ‘re/generation’ refers to generating a time code output with the same time information 
as an input time code to the Translator. Output code selection is performed as described above. 
Input code selection is performed using the normal Translator controls. For re/generation to 
function correctly, the TM7000 must know the speed of the input and the output. This is 
accomplished using the FILTER menus to select ENVELOPE FILTER IN and PLAY SPEED 
RATIO to the rate of the input and output. When the input code is changed, these selections must 
be made again. 
 
Any available output may be re/generated from any translated code with a (real time) frame 
period of one second or less. The allowable speed range is 1:1 through 64:1 for all input codes 
except IRIG G, which has a maximum rate of 2:1, and IRIG A which has a maximum rate of 
16:1. 
 

Note: 

When using the Multi-Encoder as a re/generator, the Translator must be set up for code 

and speed (if not 1:1) before the multi-encoder output code is selected. 

Symmetricom, Inc. 

TM7000 TymMachine TCG/T (Rev D) 

3-17

 

Содержание TM7000















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды