www.SymetrixAudio.com
/ BROADCAST SOLUTIONS
1
!
The lightning flash
with arrowhead symbol
within an equilateral triangle is intended to
alert the user of the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons. The
exclamation point within an equilateral triangle
is intended to alert the user of the presence of
important operating and maintenance (servic-
ing) instructions in the literature accompanying
the product (i.e. this User’s Guide).
1
!
CAUTION:
To prevent electric shock, do not use
the polarized plug supplied with the unit with
any extension cord, receptacle, or other outlet
unless the prongs can be fully inserted.
1
!
Power Source:
AirTools RC-1 hardware receives
its power from the 6200 by way of the included
25-foot 7-pin DIN cable. Use only the cable and
connector specified for the product. The RC-1
may be powered by an external supply when
not used with a 6200. Refer to the following
pages for information.
1
!
User Serviceable Parts:
There are no user
serviceable parts inside this Symetrix product.
In case of failure, customers inside the U.S.
should refer all servicing to the Symetrix factory.
Customers outside the U.S. should refer all
servicing to an authorized Symetrix distribu-
tor. Distributor contact information is available
online at
http://www.SymetrixAudio.com.
"7*4
/&1"40673*3
*MOFTFUSPVWFBMJOUFSJFVSBVDVOFQJFDFQPVSWBOUFOUSFSFQBSÊFMVTBHFS
4&&08/&34."/6"-70*3$")*&3%*/4536$5*0/4
4BESFTTFSBVOSFQBSBUFVSDPNQÊUFOU
3*426&%&$)0$&-&$53*26&
/PVTFSTFSWJDFBCMFQBSUTJOTJEF3FGFSTFSWJDJOHUPRVBMJGJFETFSWJDFQFSTPOOFM
$"65*0/
8"3/*/(
503&%6$&5)&3*4,0''*3&03
&-&$53*$4)0$,%0/05&9104&
5)*4&26*1.&/5503"*/03.0*4563&
%0/0501&/
3*4,0'&-&$53*$4)0$,
Important Safety
Instructions.
!
Read these instructions.
@
Keep these instructions.
#
Heed all warnings.
$
Follow all instructions.
%
Do not use this apparatus near water. This
apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
^
Clean only with dry cloth.
&
Do not block any ventilation openings. Install
only in accordance with the manufacturer’s
instructions.
*
Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
(
This apparatus shall be connected to a mains
socket outlet with a protective earthing con-
nection. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
BL
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
BM
Only use attachments/accessories specified by
the manufacturer.
BN
Use only with the cart, stand,
tripod, bracket, or table speci-
fied by the manufacturer, or
sold with the apparatus. When
a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
BO
Unplug this apparatus during lightning storms
or when unused for long periods of time.
BP
Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug cord is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Safety
1
Page
Before You Begin
What Ships in the Box
ø
An RC-1 hardware device.
ø
A 25-foot 7-pin DIN cable.
ø
Four rubber stick-on feet.
ø
This User’s Guide.
What You Need to Provide
ø
An AirTools 6200 Digital Voice Processor or...
ø
A MIDI Program Change compatible hardware
device.
Getting Help
Additional information covering 6200 and RC-1
integration can be found in both the 6200’s User’s
Guide as well as within 6200 Designer’s help
module which acts as a complete user’s guide for
the 6200 Designer software.
If you have questions beyond the scope of this
User’s Guide, the 6200’s User’s Guide or the help
module for 6200 Designer, contact our Customer
Support Group in the following ways:
Tel:
+1 (425) 778-7728
8:00 am to 4:30 pm
Monday through Friday,
Pacific Time
Web:
http://www.SymetrixAudio.com
This device complies with part 15 of the FCC Rules.
Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class B Digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations
Cet appariel numerique de la classe B respecte toutes les Exigences
du Reglement sur le materiel brouilleur du Canada.
