SYMEO Local Positioning Radar System
LPR®-1D24
LPR®-1D24 Station
– Overview and Mounting
Web User Interface for LPR®-1D24
Copyright © SYMEO GmbH 2015
LPR-1D24_Users_Manual_FCC-IC-Edition_EN.docx
Page 22 of 34
7.3
Device
With this function (see picture below) you switch either to:
Device configuration
Application settings
VPN remote access settings
Firmware update
Reboot device
Figure 12: Device Menu
Furthermore you will find on top of every page the device status (see picture below):
Figure 13: Information overview and device status
The information overview shows you the Hostname of the LPR
®
-1D24 unit and its IP-
address.
The device status shows you the status of the services and interfaces.
o
The service status “
Measurement Filter
” and “
Measurement Daemon
” and also the
interface status “
Binary protocol
” must be green, otherwise please contact Symeo
customer support.
It takes some seconds after switching on or after a reboot before the
color changes to green. A yellow color could indicate as well an error
in the configuration settings.
The interface status “
Binary protocol
” is only green if the customer is connected to the
binary port.
