Symbol WSS 1000, Руководство по продукции

Страница: 82 / 133

6-13
Operating the WSS 1000
minimum element widths of bar code symbols. Refer to Appendix A for the RS 1 and WS
1200 decode zones.
Communications
Connecting Cable for Data Communications to a Host Computer
1. Plug serial cable (RS-232) into the communication port located on the right side of
the back of the single-slot cradle, or on the left end of the 4-slot cradle.
2. Connect the other end of the cable to the serial (COM) port of the host computer,
modem, or printer.
Note: In most cases, you must use a null-modem cable.
3. Place the WWC 1000 in the cradle. The amber indicator lights.
4. Press the appropriate key on the WWC 1000, as required by the application.
5. The cradle’s COM indicator blinks when communications begin.
Note: Do not remove the wrist computer while the cradle’s COM light is
blinking.
6. When communications are complete, the COM light stays on steady.
Wireless Printing
Note: Wireless printing is applicable only to the WWC 1049, and works
only with applications modified to support wireless printing such as
STEP and TNClient. Any application developer can create an
application using wireless printing using the Series 3000 ADK.
The WWC 1049 can perform wireless printing with Comtec’s portable printers such as the
MP5033 if:
•
Print support is included with the application loaded on the terminal.
•
The terminal is within range of a supported wireless printer.
Refer to the documentation for your application and to the Series 3000 Application
Development Kit for more information on printing.