Symbol WSS 1000, Руководство по продукции

Страница: 48 / 133

4-7
Spectrum24 RF Terminal Setup
d. Select Default Router from the main configuration menu. The Default Router
screen is displayed.
Figure 4-5. Default Router Screen
To change the current Default Router setting, backspace over the current value
and type a new value, in decimal form. Each part of the four-part address must
be in the range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
e. Select Terminal IP Address from the main configuration menu. The Terminal IP
Address screen is displayed.
Figure 4-6. Terminal IP Address Screen
To change the current Terminal IP Address, backspace over the current value and
type a new value in decimal form. Each part of the four-part address must be in
the range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
DEFAULT ROUTER
Enter Default Router
157.235.93.178
BkSp, Clear, Enter
TERMINAL IP ADDRESS
Enter IP address:
157.235.93.186
BkSp, Clear, Enter