Symbol VRC 89 Series, Руководство по продукции

Страница: 81 / 108

6-11
Configuring the Terminal
Figure 6-13. Terminal Information Screen
2. Tap Next.
3. WLANUpdate searches for active OSUpdate Servers that have the right operating
system and Boot Code for the terminal and creates a list in the screen, as shown
below:
Figure 6-14. List of OSUpdate Servers
If the WLANUpdate fails to find an OSUpdate server, the following screen displays:
Figure 6-15. WLANUpdate Unable to Finf Server
This could happen for one of the following reasons:
• OSUpdate is running on a slow network and did not respond quickly enough.
Tap Back. This will make WLANUpdate perform a 'slow network' search. If no
server is found again, the above screen displays again. Otherwise the screen
shown in
Figure 6-14 displays.
• OSUpdate is running on a different subnet to your terminal. WLANUpdate will
be unable to automatically locate your OSUpdate server. To continue, manually