Symbol SPT 1700, Руководство по продукции

Страница: 227 / 317

12-23
Applications: Preferences
3. Tap the command you want from the Command list. If the command requires
additional information, a field appears to the right of it for you to enter the
information. The following commands are available:
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK to confirm your selection and return to the Details dialog.
Wait For Tells your SPT 1700 terminal to wait for specific characters from the TCP/IP
server before executing the next command.
Send Transmits specific characters to the TCP/IP server to which you are connecting.
Send CR Transmits a carriage return or LF character to the TCP/IP server to which you
are connecting.
Send User ID Transmits the User ID information entered in the User ID field of the Network
Preferences screen.
Send Password Transmits the Password entered in the Password field of the Network
Preferences screen. If you did not enter a password in the Password field, this
command prompts you to enter one. The Password command is usually
followed by a Send CR command.
Delay Tells your SPT 1700 terminal to wait a specific number of seconds before
executing the next command in the login script.
Get IP Reads an IP address and uses it as the IP address for your SPT 1700 terminal.
This command is used with SLIP connections.
Prompt Opens a dialog and prompts you to enter text of some kind (for example, a
password or a security code).
End Identifies the last line in the login script.
Tap here