Symbol SPT 1700, Руководство по продукции

Страница: 166 / 317

9-22
SPT 1700 Series Product Reference Guide
Creating a CRD1700-4000E Modem Sync Service
The SPT 1700 terminal communicates with the CRD1700-4000E via a Modem Sync. The
Modem Sync offers many options which must be configured for use with the CRD1700-
4000E.
Create a separate CRD1700-4000E network configuration and select it as your default
Modem Sync service. Use either Graffiti or the keyboard feature (click in the lower left-hand
corner of the scratch pad on the
abc to access the keyboard) to enter the following
information:
1. Select the HotSync application from the main application screen.
2. Choose the Select Service box under the Modem Sync icon to create a new
CRD1700-4000E service.
3. To select the Earthlink service, Click Menu->Duplicate.
4. Change the service name to CRD1700-4000E. Leave the user name and password
blank. You may enter any phone number you want, except ‘00’, or you may leave it
blank. The SPT 1700 terminal will not be able to HotSync if you use ‘00’ as a phone
number.
Configuring the Remote Host PC for Use with the Ethernet
Cradle
The remote PC you wish to HotSync the SPT 1700 to must be set up for Network HotSync
and configured to run from the network.
1. Make sure HotSync Manager is installed and running.
2. From the HotSync Manager, make sure Network is checked. If you don’t want
HotSync Manager to use a serial port, make sure Local is unchecked.
Note: The PC must be configured for proper TCP/IP network operation.
The Ethernet HotSync Process
Once the CRD1700-4000E is properly connected, data communication between an SPT 1700
terminal and the host computer can take place. When a terminal is inserted in the cradle, the
cradle detects its presence and attempts to initiate the HotSync process on the terminal. All
local slots in the cradle operate simultaneously; the HotSync procedure starts immediately
when any terminal is inserted into a local slot.