Symbol PDT 8100 Series, Руководство по продукции

Страница: 285 / 402

12-13
Maintenance and Troubleshooting
CRD 8100 1200M
Table 12-4. Troubleshooting The CRD 8100-1200M
Symptom Possible Cause Action
LEDs do not light when terminal
or spare battery is inserted. Cradle is not receiving power. Ensure the power cable is
connected securely to both the
cradle and to AC power.
Terminal is not seated firmly in
the cradle. Remove and re-insert the
terminal into the cradle,
ensuring it is firmly seated.
Spare battery is not seated
firmly in the cradle. Remove and re-insert the spare
battery into the charging slot,
ensuring it is firmly seated.
Terminal battery is not charging. Terminal was removed from
cradle or cradle was unplugged
from AC power too soon.
Ensure cradle is receiving
power. Ensure terminal is
seated correctly. Confirm main
battery is charging under Start -
Settings - System - Power. If a
terminal battery is fully
depleted, it can take up to 2.5
hours to fully recharge a battery
(if the terminal is off and longer
if the terminal is operating).
Battery is faulty. Verify that other batteries
charge properly. If so, replace
the faulty battery.
The terminal is not fully seated
in the cradle. Remove and re-insert the
terminal into the cradle,
ensuring it is firmly seated.
Spare battery is not charging. Battery not fully seated in
charging slot. Remove and re-insert the spare
battery into the cradle, ensuring
it is firmly seated.
Battery inserted incorrectly. Ensure the contacts are facing
down and toward the back of
the cradle.
Battery is faulty. Verify that other batteries
charge properly. If so, replace
the faulty battery.