Symbol PDT 8100 Series, Руководство по продукции

Страница: 117 / 402

4-21
Communications
3. Insert the terminal into the cradle. The cradle’s communication LED turns red, then
flashes green, indicating that the host computer and terminal are communicating.
See
Communication LED Indicator on page 4-32 for other indications.
4. On the terminal, a succession of dialog boxes appear, indicating the status of the
connection.
5. Once connected, tap Start - Internet Explorer to launch the browser.
6. To close your internet session, tap the two arrows on the navigation bar to expose
the Connected dialog box, then tap the
End
button. You may remove the terminal
when the connection has closed itself.
Country Setup
The modem defaults to operation with US telephone networks (country code: B5). To
operate the modem with other country telephone networks, you must set the Country Code
by entering the Country of Installation command. The modem will adjust it’s operating
parameters to comply with the telephone network in the country specified.
Edit Extra dial-string modem commands: text box to set country parameters.
The syntax used is: +GCI=<country_code>;
The supported countries and there codes are:
Country Code Country Code Country Code
Austria FD or 0A Greece 46 Norway FD or 82
Belgium FD or 0F Iceland FD Portugal 8B
Brazil 16 Ireland FD or 57 Spain FD or A0
Canada 20 Italy FD or 59 Sweden FD or A5
Denmark FD or 31 Liechtenstein FD Switzerland FD or A6
Finland FD or 3C Luxembourg FD TBR-21
(Europe) FD
France FD or 3D Mexico 73 United
Kingdom FD or B4
Germany FD or 42 Netherlands FD or 7B United States B5
(Default)
Note: It is highly recommended that you use FD where possible. If you have trouble
connecting, use the alternate code where provided.