Symbol PDT 8000, Руководство по продукции

Страница: 238 / 376

9-30
PDT 8000 Series with Windows
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
Editing a Profile
Select a profile from the list box and tap Edit to display the Mode tab where the ESSID and
operating mode can be changed for the profile. Use the Encryption, IP Config and Power
tabs as necessary to edit the profile power consumption and security parameters.
Creating a New Profile
Tap New to display the Mode tab wherein the profile name and ESSID can be set. Use the
Encryption, IP Config and Power tabs as required to set security, network address
information and power consumption level for the new profile.
Deleting a Profile
Select a profile to delete from the list box and tap Delete to remove the selected profile.
Ordering Profiles
Select a profile from the list box and tap Move Up or Move Down to order the profile. If the
current profile association is lost, Mobile Companion attempts to associate with the first
profile in the list and then the next until a new association is achieved.
Note: Profile Roaming must be enabled.
Configuring the Radio Using a Registration File
Default settings for the Spectrum24 radio card can be set on the terminal using registry
(.reg) files. There are two registry files: Spectrum24DS.reg contains the global registry
settings for Mobile Companion and S24Profiles.reg contains the profile specific and
operating registry settings for Mobile Companion.
A sample S24Profiles.reg file is provided as part of the DCP for PDT8000w. Edit the file
using a text editor. See notes in the sample file for the key information that can be modified.
Save this text file as S24Profiles.reg. Use ActiveSync to copy this file to the Platform folder
on the terminal. Once this file is loaded onto the terminal, these settings are restored after
a cold boot.