Symbol PDT 6100, Руководство по продукции

Страница: 73 / 108

7-12
PDT 6100 Product Reference Guide
The display is updated for every 1024 bytes (1 KB) of memory.
4. When the transmission completes or aborts, the terminal displays the transmission
status screen:
Memory Transfer
Status 0000
A status of 0000 (all zeros) indicates that the transfer was successful. Any other status
indicates failure. Refer to Appendix C for communications status codes which indicate the
source of the error.
End Communications
To return to the Command Mode main menu, press <Clear> . Then take whatever corrective
action is necessary, and reboot the terminal.
Internal Modem Problems
If you are having difficulties with your internal modem, please check the following before
returning your product:
• Connection to the telephone network is correct.
• Any necessary special requirements such as dialing 9 and ignoring dial tone have
been considered in the event of using a PBX.
• Firmware settings described in the Series 3000 Application Programmer’s Guide
have been configured correctly.
Scanning Problems
What If ...
Nothing happens when you follow the operating instructions?
!
Check the system power.
!
Make sure the scanner is programmed to read the symbology you are trying to read.
!
Check the bar code to make sure it is not defaced. A defaced 1-D bar code may not
be readable by any scanner.
!
Check to see if you are scanning from the proper distance.
!
Try scanning a test symbol of the symbology you are trying to read.