Symbol ORG SPT 1550, Руководство по продукции

Страница: 42 / 272

2-8
SPT 1550 Product Reference Guide
There are four basic concepts for success with Graffiti:
• Draw the character shape exactly as shown in the tables later in this chapter (like
the shapes shown in the following diagram).
• The heavy dot on each shape shows where to begin the stroke. Certain characters
have similar shapes, but different begin and end points. Always begin the stroke at
the heavy dot. (Do not draw the heavy dot; it is there only as a guideline).
• Most characters require only a single stroke. When you lift the stylus from the
Graffiti writing area, your SPT 1550 terminal recognizes and displays the text
character immediately.
• The Graffiti writing area is divided into two parts: one for writing the letters of the
alphabet and one for writing numbers. The small marks at the top and bottom of
the Graffiti writing area indicate the two areas.
To write letters of the alphabet with Graffiti:
1. Tap the screen where you want to write your text (an entry in your Data Book, an
e-mail address, etc.).
Note: A blinking cursor must display onscreen above the Graffiti writing
area before you can begin writing text.
2. Use the The Graffiti Alphabet on page 2-11 to find the stroke shape for the letter
you want to create. For example, the stroke shown below creates the letter “n.”
Write letters here Write numbers here
Division line