Symbol MiniScan MS-804FZY, Руководство по интеграции

Страница: 131 / 184

7-71
Parameter Menus
Set Lengths for Codabar
Parameter # L1 = 18h, L2 = 19h
The length of a code refers to the number of characters (i.e., human readable characters)
the code contains, including start or stop characters. Lengths for Codabar may be set for
any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected
length. For example, select Codabar One Discrete Length , then scan 1 , 4 , to decode only
Codabar symbols containing 14 characters. Numeric bar codes begin on page 7-105 . To
change the selection or cancel an incorrect entry, scan the Cancel bar code on page 7-
107 .
Codabar - One Discrete Length
Two Discrete Lengths - Select this option to decode only those codes containing two
selected lengths. For example, select Codabar Two Discrete Lengths , then scan 0 , 2 , 1 ,
4 , to decode only Codabar symbols containing 2 or 14 characters. Numeric bar codes
begin on page 7-105 . To change the selection or cancel an incorrect entry, scan the
Cancel bar code on page 7-107 .
Codabar - Two Discrete Lengths