Symbol MicroKiosk MK1000, Руководство по продукции

Страница: 53 / 240

3-7
Setup and Installation: Communication
Escaping a Screen Without Saving Changes
If you have accidentally entered a screen and wish to exit it WITHOUT making ANY
changes, scan the
Cancel bar code on page B-5 .
Note: Some screens may require scanning the Cancel bar code twice, or
scanning a numeric bar code selection.
Exiting the PCK Configuration Menu
When all desired changes are made, scan the Exit and Save Changes bar code on page
B-3 to exit PCK emulation configuration.
Selecting an Option (Parameter) from a List of Options
To select an parameter from a list, scan the numeric programming bar code in Appendix B,
PCK Configuration Programming Bar Codes that corresponds to the parameter you wish to
select.
For example, to change the communication interface to wired Ethernet, navigate the main
menu and make your communication interface selection as follows:
1. Scan the Enter PCK Configuration Menu bar code to access the PCK
Configuration menu.
2. Scan the number “1” bar code to access the Select Interface Type screen.
3. Scan the number “1” bar code to choose
Wired Ethernet (10BaseT ) as your
communication interface.
4. When the number “1” bar code is scanned and Wired Ethernet (10BaseT ) is
selected, you are returned to the PCK Configuration menu.
5. Continue with additional changes by scanning the appropriate numeric bar code to
access another screen, or to initiate operation of the MK1000 in PCK emulation
mode, scan the
Save & Exit bar code.
Note: Scan the Cancel bar code to exit WITHOUT saving ANY of your
changes.