Symbol MicroKiosk MK1000, Руководство по продукции

Страница: 61 / 240

3-15
Setup and Installation: Communication
Scan the number "1" bar code to enable or disable DHCP. (For a list of MK1000 supported
DHCP options, see
Appendix H, DHCP Options .) Scan the number "2", “3”, “4”, or “5” bar
code to display the appropriate screen to change the IP Address, Subnet Mask, Gateway,
or DNS configuration, respectively. Scan the number "6" bar code to display the second
TCP/IP screen.
Figure 3-10. TCP/IP Configuration Page 2
To change the Server Host IP or Server Host Port, scan the number “1” or "2" bar code to
display the respective screen. Scan the number “3” to return to the previous screen.
Editing IP Address
When IP Address is selected at the TCP/IP Configuration Page1 screen, the following
screen displays:
Figure 3-11. IP Address Screen
To enter changes on this screen, scan the required numeric bar code(s) to enter data in the
New IP Addr field, as necessary. For Host IP addresses, you must enter three digits for
each segment for "dots" to be supplied correctly. For example, if you want to set the
address 10.10.1.2, you must enter 010.010.001.002. Remember to scan the
Save & Exit
bar code when you are finished, or scan Cancel to escape WITHOUT completing the entry.
Curr IP Addr:
192.168.0.2
New IP Addr: