Symbol LS6004i-I000, Быстрая справка

Страница: 4 / 28

2
L S 6 0 0 0 S e r i e s
If the scanner is powered by an external power supply, ensure the
power supply is connected to a power outlet. When the power
supply is connected to the scanner, the scanner powers up.
The green LED on top of the scanner illuminates and 3 power-up
beeps sound, indicating the scanner is operational.
The LS 6000’s LED and beeper indicate scanning activity. These
indications are described later in this guide.
If the scanner is inactive for more than a pre-programmed length
of time, it enters a rest mode to conserve energy. When you need
to scan again, just bring a bar code to the scanner window to
“wake up” the scanner.
If you have any problems using the scanner, contact your technical
support person for assistance.
Installing the Scanner Cable
To connect the cable to the LS 6000 scanner:
1. Switch off all devices connected to the LS 6000 cable.
2. Plug the modular connector on the cable into the receptacle
in the bottom of the LS 6000 handle. Listen for a click.
3. Gently tug the cable to ensure the connector is properly
secured.