manualshive.com logo in svg

Symbol LS 6800, Руководство пользователя

Поделиться
Скачать
Symbol LS 6800 Скачать руководство пользователя страница 97

 

5-57

 

Programming the LS 6800

 

Trigger Modes

 

This parameter controls scanner triggering. The following options are available:

 

t

 

In Level trigger mode, a trigger pull (external hardware or scanner) activates the laser 
and decode processing. The laser remains on and decode processing continues until 
a trigger release, a valid decode, or the Decode Attempt Timeout is reached.

 

t

 

In Pulse trigger mode, a trigger pull (external hardware or scanner) activates the laser 
and decode processing. The laser remains on and decode processing continues until 
a valid decode or the Decode Attempt Timeout is reached.

 

t

 

Blinking Laser mode is an internal trigger mode that cycles the scanning laser at 
approximately a 50% duty cycle after no decode attempts have occurred for 30 
seconds. This extends laser life.

 

t

 

Continuous

 

 

 

mode is an internal trigger mode that operates the scanner at a 100% 

duty cycle. The scanner continuously attempts to decode a bar code even if none are 
present. This mode is suited for time-critical applications where bar codes move past 
the scanner.

Содержание LS 6800


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды