manualshive.com logo in svg

Symbol LS 6800, Руководство пользователя, Страница: 160 / 249

Поделиться
Скачать
Symbol LS 6800 Скачать руководство пользователя страница 160

6-6

LS 6800 Product Reference Guide

Send Preset Value 

Send Values 1 through 6 by scanning the appropriate bar code. These values must be set using 
Prefix / Suffix Values on page A-5.

Value 1 = Scan Suffix

Value 2 = Scan Prefix

Modify Data 

Modify data in the ways listed. The following actions work for all send commands that 
follow it within a rule. If you program pad zeros to length 6, send next 3 characters, stop 
padding, send next 5 characters, three zeros are added to the first send, and the next send is 
unaffected by the padding. These options do not apply to the Send Keystroke or Send Preset 
Value options.

Remove All  Spaces 

To remove all spaces in the send commands that follow, scan this bar code.

Crunch All  Spaces 

To leave one space between words, scan this bar code. This also removes all leading and 
trailing spaces.

Stop Space Removal 

Scan this bar code to disable space removal.

Remove Leading Zeros 

Scan this bar code to remove all leading zeros.

Stop Zero Removal 

Scan this bar code to disable the removal of zeros.

Pad Data With Spaces 

To pad data to the left, scan the bar code containing the desired number of spaces. This 
parameter is activated by Send commands.

Содержание LS 6800


























































































































































































































































Отзывы:

Нет отзывов