16
Quick Reference
What If...
Your terminal is operative but scanned data is not
displayed? Or is displayed improperly on the screen?
• If you’re working with a Synapse “Smart Cable,” refer to your
Installation Guide.
• If you’re operating in RS-232C, check that the following
parameters have been programmed correctly:
> Baud Rate
> Stop Bits
> Parity
> Bits per Character
The laser does not activate, which is followed by a long,
high beep.
• You may be scanning in an inappropriately hot environment.
Remove the scanner from the environment, or allow the laser
to cool down. If the condition persists, contact the Symbol
Support Center.
