15
What If...
Nothing happens when you follow the operating
instructions.
You Should:
• Check the system power.
• Make sure you are using the correct interface cable for the
host device.
• Check for loose cable connections.
• Make sure the scanner is programmed to read the
symbology you are trying to read. See the
Product Ref-
erence Guide
.
• Check the label to make sure it is not defaced; if damaged
beyond its error correction capability, it will not decode.
• Try scanning a test symbol of the symbology you are
trying to read.
Your terminal operates but scanned data is not
displayed correctly?
You Should:
• Check the system power.
• Check for loose cable connections.
• Check that the communication parameters (baud rate,
parity, stop bits, etc.) are set properly for the receiving
device.
