Symbol LS 4208, Руководство пользователя

Страница: 227 / 278

Miscellaneous Scanner Options 13-3
Introduction
This chapter includes commonly used bar codes to customize how data is transmitted to the host device. Refer to the
Advanced
Data
Formatting Programming Guide
p/n 72-69680-xx for further customization options.
The scanner ships with the settings shown in the Miscellaneous Scanner Options Default Table on page 13-4 (also see Appendix
A,
Standard Default Parameters
for all host device and miscellaneous scanner defaults). If the default values suit requirements,
programming is not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and
are
preserved even when the scanner is powered down.
If not using a Synapse or USB cable, select a host type (see each host chapter for specific host information) after the power-up
beeps
sound. This is only necessary upon the first power-up when connected to a new host.
To return all features to default values, scan a default bar code in Default Parameters on page 4-5 . Throughout the programming
bar
code menus, default values are indicated with asterisks (
*
).
* Indicates Default
(00h)
Hex Value
Scanning Sequence Examples
In most cases, scan one bar code to set a specific parameter value. Other parameters, such as Prefix Value, require scanning
several
bar codes. See each parameter for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.