2
Prerequisite Requirements
The following hardware and software resources are required to install and operate a CB3000 and use
the CB3000 Discovery Tool:
•
PC to be used during device configuration. The PC must have an RJ-45 Ethernet port and a
CDROM drive. The PC must be running the following:
• Windows 2000 or XP operating system
• A browser interface running Internet Explore 5.0 (or higher) or Netscape 6.0 (or higher)
•
An access point (for infrastructure mode operation) or a networked client (for Ad-hoc mode
peer-to-peer operation).
Verifying the Package Contents
Before installing the CB3000, verify the package contains the following:
•
CB3000 Installation Guide (this guide)
•
CB3000 Software and Documentation CDROM
•
CB3000 Client Bridge (Part No. CB-3000-0010-WWR)
•
Ethernet cable
•
Power adapter with 4 localized plugs
•
Detachable omni-directional 802.11a/b/g antenna.
•
Mounting hardware.
CAUTION
Only qualified and approved antennas may be used with the CB3000.
NOTE
Contact the Symbol Support Center to report any missing or improperly
functioning components.
!