Page
24
of
26
-----
To update the FRUSDR, type the following command:
frusdr -cfg XXXXXX
Where XXXXXX is the BIOS file (for example “master.cfg”)
Answer the following questions:
1.
Do you want to update the Chassis info area of the FRU (Y/N)?
Y
2. Do you want to enter the Chassis Serial Number (Y/N)? Y
a. Enter the system serial number
3. Is this correct:
a. Check to ensure the serial number is correct and Press Y
4. Do you want to enter the chassis part number (Y/N)? N
5. Do you want to enter data into the additional chassis field 1 (Y/N)? N
6. Do you want to enter data into the additional chassis field 2 (Y/N)? N
7. Do you want to update the product info area of the FRU (Y/N)? Y
8. Do you want to enter the product part number (Y/N)? N
9. Do you want to enter the product serial number (Y/N)? Y
a. Enter the system serial number
10. Is this correct:
a. Check to ensure the number is correct and Press Y
11. Do you want to enter a product asset tag (Y/N)? N
-----
To update the LCP branding, type the following command:
Fwpiaupd -nopc -bysegment -address=22
-delay=9999 XXXXXX
Where XXXXXX is the LCP branding file (for example, the SIEM 9750 uses the file “siem9750.hex”)
During the LCP Branding flash, answer the following question
“Do you want to upload or verify?” [U, V, ESC]
U
-----
When you are finished performing updates, reboot using the front panel reset button.
