Symantec PCANYWHERE - V12.5, Руководство пользователя

Страница: 109 / 329

■
To create a new connection item, on the File menu, click New Item >
Advanced.
3
In the Remote Properties window, on the Connection Info tab, select an
available COM port.
4 Select one of the following start modes:
■
Remote Control
■
Remote Management
■
File Transfer
Symantec pcAnywhere lets you switch modes during a session.
See “About the start modes for remote connections” on page 40.
5 Click OK.
Configuring a remote computer to use directory services
Prior to configuring a host computer to use directory services, you should configure
the directory service by going to the pcAnywhere Edit menu and clicking
Preferences.
For more information, see Chapter 5, "Integrating pcAnywhere with directory
services" in the Symantec pcAnywhere Administrator's Guide
If your administrator has configured pcAnywhere to use directory services, you
can configure the remote computer to search the directory server for available
hosts. Only the host computers that are registered on the directory server appear
in the search results. Depending on the configuration and size of your network,
this type of search is typically faster and more reliable than scanning an entire
network for available hosts.
For more information, see the Symantec pcAnywhere Administrator's Guide.
To configure a remote computer to use directory services
1 In Advanced View, on the left navigation bar, under pcAnywhere Manager,
click Remotes.
2
In the right pane, under Remotes, do one of the following:
■
To configure an existing connection item, right-click the item, and then
click Properties.
■
To create a new connection item, on the File menu, click New Item >
Advanced.
3
In the Remote Properties window, on the Settings tab, click Use directory
services, and then select the directory server that you want to use.
109 Controlling another computer remotely
Ways to set up a remote computer