Symantec Altiris Workflow 7.0, Руководство по настройке

Страница: 34 / 42

13 On the Workflow Persistence step, click a persistence option.
Note: If you are currently running Workflow 6.5, make sure you use the same
persistence settings for Workflow 7.0.
If you install Workflow 7.0 with different persistence settings than your
currently running 6.5 version, all current tasks will become non-functional.
See “Upgrading from Workflow 6.5” on page 15.
See “Determining a project's persistence setting” on page 17.
If you cannot determine your persistence setting from Workflow 6.5, use
Exchange for your Workflow 7.0 installation.
14 On the Symbus ORM step, configure the ORM.
15 After you have passed the system check, click Next and then click Install.
You will be notified when the installation has completed successfully.
Configuring Workflow 7.0
Once you have installed Workflow 7.0, you are ready to configure it.
See “About Workflow 7.0” on page 9.
See “Installing Workflow Solution through Symantec Installation Manager”
on page 21.
See “Downloading the Workflow installer through the Symantec Management
Console ” on page 22.
See “Installing Workflow Server” on page 27.
See “Installing Workflow Designer” on page 29.
See “Licensing Workflow Server, Workflow Designer, and Process Manager”
on page 37.
See “Migrating links from Notification Server 6.5 to Symantec Management
Platform 7.0” on page 35.
Configuration involves the following steps:
Installing Workflow 7.0
Configuring Workflow 7.0
34