Symantec Altiris Workflow 7.0, Руководство по настройке

Страница: 27 / 42

15 Wait at least five minutes so that the escalations run.
16 On the secondary server, open the Logging and Configuration tool, and then
look under the Log Viewer tab.
If the error level logs from your test project appear in the Log Viewer, you
have successfully installed Workflow 7.0 in the separate background
processing configuration.
Installing Workflow Server
See “Installing Workflow for the first time” on page 14.
If you are upgrading from Workflow 6.5, see the following section:
See “Upgrading from Workflow 6.5” on page 15.
After you have installed Workflow Solution in the Symantec Installation Manager
and downloaded the installation file through the Symantec Management Console,
you are ready to install Workflow Server.
See “About installing Workflow 7.0” on page 13.
See “Installing Workflow Solution through Symantec Installation Manager”
on page 21.
See “Downloading the Workflow installer through the Symantec Management
Console ” on page 22.
Workflow 7.0 has a single installer. Although you must install Workflow Server,
installing other pieces of Workflow 7.0 is optional. During installation you can
select which pieces you want to install on the local computer.
See “About Workflow 7.0” on page 9.
See “Installing Workflow Designer” on page 29.
27 Installing Workflow 7.0
Installing Workflow Server