Symantec Altiris Workflow 7.0, Руководство по настройке

Страница: 31 / 42

6 On the Workflow Persistence step, click a persistence option.
Note: If you are currently running Workflow 6.5, make sure you use the same
persistence settings for Workflow 7.0.
If you install Workflow 7.0 with different persistence settings than your
currently running 6.5 version, all current tasks will become non-functional.
See “Upgrading from Workflow 6.5” on page 15.
See “Determining a project's persistence setting” on page 17.
If you cannot determine your persistence setting from Workflow 6.5, use
Exchange for your Workflow 7.0 installation.
7 After you have passed the system check, click Next and then click Install.
You will be notified when the installation has completed successfully.
Installing Process Manager
If you are upgrading from Workflow 6.5, see the following section:
See “Upgrading from Workflow 6.5” on page 15.
After you have installed Workflow Solution through the Symantec Installation
Manager and downloaded the installation file through the Symantec Management
Console, you are ready to install Workflow Designer and Process Manager.
See “About installing Workflow 7.0” on page 13.
See “Installing Workflow Solution through Symantec Installation Manager”
on page 21.
See “Downloading the Workflow installer through the Symantec Management
Console ” on page 22.
Workflow 7.0 has a single installer. Although you must install Workflow Server,
installing other pieces of Workflow 7.0 is optional. During installation you can
select which pieces you want to install on the local computer.
See “About Workflow 7.0” on page 9.
You can install Workflow on as many client computers as you need.
See “Installing Workflow Server” on page 27.
31 Installing Workflow 7.0
Installing Process Manager