Symantec 20097684 - Norton Ghost 15.0, Руководство пользователя

Страница: 142 / 213

To run a one-time recovery point conversion to virtual disk
1 On the Tasks page, click One Time Virtual Conversion.
2 Click the virtual disk type (and version, if applicable) that you want to create,
and then click Next.
3
Do one of the following:
■
Click View all recovery points near the bottom of the pane, and then
select a recovery point in the list based on its creation date.
■
In the View by list, select one of the following alternative recovery point
sources:
Displays all of the discovered recovery points in the order in
which they were created.
■
If no recovery points are discovered, the table is empty. In
such cases, you can select an alternate date by using the
drop-down calendar.
■
Select a recovery point from the list.
Date
Lets you browse to another recovery point location. For example,
you can browse an external (USB) drive, network location, or
removable media to select a recovery point (.v2i) or incremental
recovery point (.iv2i) file.
Select this option, and then do the following:
■
Click Browse, locate and select a recovery point, and then
click Open.
■
If you selected a recovery point that is stored on a network,
type your network credentials.
See “About network credentials” on page 68.
File name
Managing backup destinations
Running a one-time virtual conversion
142