9
USE OF BUTTONS
Light Switches
When the switch is turned to this position as
the engine is being started, headlight, rear light,
instrument panel light, and position light will
come on.
When the switch is turned to this position as
the engine is being started, rear light,
instrument panel light, and position light will
come on.
When the switch is turned to this position, all
lights will go off.
Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear brake lever will
start the engine.
High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between
high and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
Passing Switch
Turn ignition switch “ON” and press this button down. Then, the high beam of headlight
will come on immediately to warn the driver of the vehicle ahead that you intend to
overtake him/her. (For overtaking, high beam indicator will come on at this time) This
button will return to original position after releasing.
Light Switches
Electrical
Starter Button
High/Low
Beam Switch
Turn Signal
Switch
Horn Switch
Passing switch
Note:
Position Light Function
:
This light can indicate the motorcycle’s
position when the motorcycle is
running in dim, rainy, or foggy
weather.
CAUTION:
Release this button immediately after engine has been started, and never press the button
again to avoid damaging the engine.
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
Do not use light system. Turn headlight and turn signal lights to the “OFF” position when the
engine is being started.
PASSING
