10
Horn Switch
Press this button down when ignition switch
is in the “ON” position, the horn will sound.
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal
lights will flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
SAFETY HELMET HOOK
Open the saddle, and hook the safety helmet
chin belt onto the hook, and then lock the
saddle.
SADDLE LOCK
Unlock:
Insert the ignition switch key into lock located
under saddle left (front) and turn to right to
unlock.
Lock:
Press the saddle down and it will be locked
automatically.
After the saddle has been locked, check to
make sure it has been locked properly by
lightly lifting the saddle.
STORAGE BOX
This box is located under the saddle.
Maximum load capacity: 10kg.
Do not store valuables in the box.
Make sure that the saddle has been locked completely after it was pressed down.
Take out valuables before washing to avoid wetting these objects.
Do not place thermal sensitive objects in the box because of engine’s heat and high temperature.
CAUTION:
Do not press this button when you are in
the area where there’s no honking.
CAUTION:
Be sure to remove the key after the saddle has
been locked.
Do not put the key inside the storage box after
unlocking to avoid the key being locked inside
the storage box when the saddle is pressed
down automatically.
CAUTION:
DO not hang the safety helmet onto this hook
when riding to avoid damaging motorcycle and
loosing safety helmet’s function.
Helmet hook
Storage box
