3
Step 3: Attach the SIDE PANEL [C] to the LEFT FRONT PANEL [D] with 2 KD SCREWS. Attach
the other SIDE PANEL [C] to the RIGHT FRONT PANEL [G] with 2 KD SCREWS. See Fig. C.
fig. C
Step 4: Attach the LEFT and RIGHT SIDE PANELS [C, D and G] to the BASE [B] using 4 KD
SCREWS. (2 screws for each side) See Fig. D
fig. D
Step 5: Place the LOWER FRONT PANEL [F] in between the lower section of 2 FRONT
PANELS [D and G] and attach with 2 KD SCREWS (1 screw each side). See Fig. E
fig. E
Step 6: Carefully place the INSERT into the unit opening. The front of INSERT should
be flush with the front of the mantel. Once the INSERT is in place, attach 2 MOUNT-
ING BRACKETS [V] with KD SCREWS (R) onto the bottom of insert. (1 screw for each
bracket) See Fig. F
fig. F
Step 7: Attach the UPPER FRONT PANEL [E] in between the upper section of the 2
FRONT PANELS [D and G] with 6 KD SCREWS. (3 screws for each side) See Fig. G
fig. G
Step 8: Attach 2 MOUNTING CLIPS [U] onto the top of INSERT and lock in place with 2
SHORT KD SCREWS [T]. See Fig. H
fig. H
Step 9: Install the TOP PANEL [A] to the unit as shown and attach with 5 KD SCREWS.
See Fig. I
fig. I
Step 10: Tighten all KD SCREWS.