2
impOrtaNt:
plEaSE NOtE WHEN YOU OpEN tHE cartON carEFUllY cHEcK
tHE UNit aND maKE SUrE tHErE iS NO DamaGE. iF YOU HaVE aNY
prOBlEmS WitH aSSEmBliNG tHE UNit, WitH HOW tHE VariOUS
FUNctiONS WOrK Or WitH DamaGE Or miSSiNG partS plEaSE call
1-800-459-4409 (ESt) immEDiatElY FOr SErVicE.
NOtE:
DO NOt rEtUrN UNit tO tHE StOrE BEFOrE calliNG tHE tOll FrEE NUmBEr.
Do not dispose of you cartons until you are completely satisfied with your new
fireplace heater.
NOTE:
Light bulbs may become loose during shipping. If the flame effect is dim or
does not work, please check that light bulb or bulbs are finger tight in socket. See
instructions for replacing bulb or bulbs.
ASSEMBLY INSTRUCTIONS
partS liSt:
A) Top panel .........................................................................................................................1
B) Base panel .......................................................................................................................1
C) Side panel........................................................................................................................2
D) Left front panel ...............................................................................................................1
E) Upper front panel ..........................................................................................................1
F) Lower front panel...........................................................................................................1
G) Right front panel.............................................................................................................1
R) KD screws ..................................................................................................................... 59
S) Connector ........................................................................................................................2
T) Short KD screws .............................................................................................................2
U) Mounting clips ...............................................................................................................2
V) Mounting brackets .........................................................................................................2
X) Plastic connector ..........................................................................................................15
Y) SELF REPAIR SET
Touch-up repair paint (bottle)
L shape bracket .....................................................................................................................2
Screws for L bracket .............................................................................................................8
Plastic Connector ..................................................................................................................1
KD Screws ..............................................................................................................................3
KD Nuts ..................................................................................................................................3
Z) WALL ANCHOR SAFETY CABLE
Wall Anchor ...........................................................................................................................1
Screw for wall anchor ..........................................................................................................1
Screw for mantle ...................................................................................................................1
Cable.......................................................................................................................................1
TOOL REQUIRED: PHILLIPS HEAD SCREWDRIVER
MANTEL ASSEMBLY:
CAUTION:
Place a piece of cardboard or protective sheet on the floor in order to
avoid scratching the decorative surface of your mantel during assembly.
Please DO NOT fully tighten the KD screws until all panels are assembled.
NOTE:
Each Plastic Connector is pre-assembled (pre-drilled) on the specific panels
with 2 screws. If the KD screw(s) do not fit during assembly, loosen the 2 (pre-drilled)
screws to adjust the Plastic Connector until the KD screws are able to be installed.
Tihten all KD screws once all panels are assembled.
Step 1: Attach 2 CONNECTOR [S] to the LEFT and RIGHT FRONT PANELS [D & G] with 4
KD SCREWS. (2 screws for each side) See Fig. A
fig. A
Step 2: Attach all PLASTIC CONNECTOR [X] to the PANELS [C, D, E and G] as shown in
Fig. B. (2 screws for each PLASTIC CONNECTOR).
fig. B
NOTE: If the KD SCREW(S) do not fit during assembly, loosen the 2 screws to adjust the PLAS-
TIC CONNECTOR until the PANELS/KD SCREWS can be installed.