Setting Menu
Setting Menus:
In fully stop mode, press the
SETUP
button on the remote control, the setting menu will
appear on the screen as below. Use the Direction , , , ,
Numeric
and
ENTER
buttons
to select and highlight the function you need to set or reset. Press the
ENTER
button to
SETUP
button to save the settings
and exit.
IN GENERAL SETUP PAGE:
1. If the TV shape is selected, use the
Direction
and
ENTER
buttons to set the aspect
ratio to match the connected TV.
2. If Angle Mark is selected, use the
Direction
and
ENTER
buttons to set it On or Off. If
set to On, when multi-angles are available in the playing DVD, the multi-angle logo
will appear on the screen.
3. If OSD Lang (On Screen Display Language) is selected, use the
Direction
and
ENTER
buttons to set the OSD language as desired.
4. If Captions is selected, use the
Direction
and
ENTER
buttons to set it On or Off.
If set to On, when multi-language are available in playing disc, the captions will
appear on screen.
5. If Screen Saver is selected, use the
Direction
and
ENTER
buttons to set it On or Off. If
set to On, the screen saver will come on when the unit stops or the image is paused
for approximately
minutes.
6. If Last Memory is selected, use the
Direction
and
ENTER
buttons to set it On or Off.
If set to On, the unit will start playback from the position where the disc was stopped
last time.
14
five
enter or
the selection. After setting, press the
confirm
