Operation
12
1. Connect the unit to AC/DC Adaptor/ Car Adaptor as previous procedure.
2. Lift up the panel on the master unit as shown below:
3. Insert the disc to the center spindle with label side face up and close the lid.
4. Power on the unit by sliding the
POWER ON/OFF
to the ON position.
The green indicator will turn on and the unit will start playback automatically.
5. For private listening, insert headphones into the phone jack. The external speakers will
disconnect automatically.
Press the
DISPLAY ON/OFF
button to turn
Press again to turn it ON.
7. To power off, slide the
POWER ON/OFF
switch to the OFF position.
SLAVE UNIT:
1. Connect the slave unit to the master unit by the supplied DC and AV connection
cables as previous procedures.
2. Slide the
POWER ON/OFF
switch on the right side of unit to the ON position to power
on the unit.
3. Press the
button to enter the display setting menu.
Press the
or
to move up and down, and press
button
to
Press the
button to confirm.
4. For private listening, insert the headphones into the phone jack. The speakers will
disconnect automatically.
6. To power off, slide the
POWER ON/OFF
switch to OFF position.
Lift up the panel
on the master unit.
MASTER UNIT:
DISPLAY ON/OFF
set.
DISPLAY SETUP
DISPLAY SETUP
MUTE
6.
OFF the display.
VOL-/+
5. Press the
DISPLAY ON/OFF
button to turn
Press again to turn it ON.
OFF the display.
