sylber CFO-25S, Руководство по установке

Страница: 4 / 12

4
Technical specifications
DESCRIPTION
Total area 2,30 m
2
Exposed area 2,16 m
2
Effective absorption area 2,15 m
2
Connections (M) - (M) 1"
Empty weight 41,0 kg
Liquid content 1,6 l
Recommended flow rate for each line per m
2
of collector 30 l/(h x m
2
)
Minimum flow rate for each line per m
2
of collector 12 l/(h x m
2
)
Maximum flow rate for each line per m
2
of collector 60 l/(h x m
2
)
Glass thickness 3,2 mm
Thickness of rock wool insulation 40 mm
Absorption ( α ) 95 %
Emissions ( ε ) 4 %
Maximum permitted pressure 10 bar
Stagnation temperature 200 °C
Maximum number of collectors in a line 6 n°
Efficiency parameters
Description
Absorber
surface area
Open surface
area
Gross surface
area
U/M
Optical efficiency ( ηο ) (*) 0,785 0,778 0,726 -
Thermal dispersion factor (a1) (*) 4,61 4,57 4,27 W/(m
2
K)
Thermal dispersion temperature dependence factor
(a2) (*)
0,0021 0,0021 0,0019 W/(m
2
K
2
)
Description U/M
IAM (50°) (*) 0,93 -
Collector efficiency (
ηcol
) (**) 59,2 %
(*) Tested according to EN 12975, referred to a 33.3%
water-glycol mix, flow rate of 160 l/h, and irradiation G
= 800W/m
2
.
Tm = (Coll._inlet _temp.+Coll._outlet_temp.)/2
T*m =
(Tm-T_ambient)/G
(**) Calculated with a temperature difference of 40K be-
tween the solar collector and the surrounding air, and
with total solar radiation of 1000 W/m
2
referred to the
exposed area.
Efficiency curve (referred to absorber surface area)
0,75
0,80
0,65
0,70
0,55
0,60
0,45
0,50
0,40
0,35
0 0,01 0,02 0,03 0,04 0,05 0,06 0,07 0,08
Tm[m 2 K/W]
*
WIND AND SNOW LOADS ON COLLECTORS
Installation
height above
ground
Wind speed
Mass in kg to secure collector
against lifting by wind
Load on roof from wind, snow, and
collector weight
At angle of
45
° At angle of
20
° At angle of
45
° At angle of
20
°
0 - 8 m 100 km/h 80 kg 40 kg 320 kg 345 kg
8 - 20 m 130 km/h 180 kg 90 kg 470 kg 430 kg
20 - 100 m 150 km/h 280 kg 150 kg 624 kg 525 kg
Maximum permitted load from wind and snow (including combined loads) on surface of collector: 1500 Pa (175
km/h).
TECHNICAL SPECIFICATIONS