background image

This manual, Code 20101512 - Rev. 2 (02/16) comprises 12 pages.

2

Conformity

CONFORMITY

Solar collectors conform to EN 12975 standard and to Solar Keymark certification standard.

 

b

This product must only be used for the purpose for which it is designed and made, as specified by 

S

S

 

declines all responsibility, contractual or other, for damage to property or injury to persons or animals caused by 

improper installation, adjustment, maintenance or use.

Range

RANGE

MODEL

CODE

CFO-25S

20099917

CFO-25S (pack of 5)

20099918

Contents

CONTENTS

The following symbols are used in this manual:

 

b

CAUTION! =

 Identifies actions that require caution 

and adequate preparation.

 

a

STOP! =

 Identifies actions that you MUST NOT do.

This manual, Code

- Rev.

comprises

pages.

System layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . 4

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Water circuit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Unpacking the product  . . . . . . . . . . . . . . . . . . . . . . . . . 7

Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Filling the circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Содержание CFO-25S













Отзывы: