16
HEADLIGHT BEAM TESTING ART. 2400/ I
PREPARATION
Using the UP and DOWN buttons, type in the height
of the headlight from the ground and press ENTER.
WARNING!
If the writing BATTERY FLAT appears when turning
on, connect the battery charger provided to the
socket situated on the back of the optical box and
leave to charge for at least 12 hours; testing can also
be done however with the battery charger connected
and functioning.
ENTER
START
ADJUSTMENT
At the top of the headlight read off the headlight
inclination stated by the manufacturer, e.g. 1.2%,
turn the wheel situated at the back of the optical box
accordingly.
Should no indications be given by the manufacturer,
observe the legal dispositions.
WARNING!
We would like to remind you that the inclination of
the headlights must in any case be in observance of
current law, which states that for lower beam
headlights situated at up to 80cm from the ground
the inclination must be at least 1%.
For upper beam headlights above 80 cm, the
inclination must be at least 1.5%.
TESTING THE LOWER BEAM HEADLIGHT
The display will now read “CHECK RIGHT
HEADLIGHT”, press ENTER.
The wording ”ANB.DX KLX=015,2” (right lower
beam Klux= “read off value ”) will now appear, check
that the position of the projection of the headlight is
aligned with the serigraphed line on the test panel
and if so, press ENTER.