Example:
• Press the key on the remote control. The LED indicator (2)
will turn orange. The code lock is now in delete mode.
• To delete a user transponder, hold it in front of the code lock
(near to the fingerprint sensor).
• When the transponder has been detected, the code lock will
beep and the LED indicator (2) will briefly turn green. The
LED indicator (2) will then turn orange again.
• The user transponder is now deleted. If the transponder
cannot be found in the code lock memory, the code lock will
emit 3 short beeps and the LED indicator (2) will flash red
before switching back to orange.
• You can now delete another user transponder. Simply hold it
in front of the code lock as described above.
• To abort the deletion process and exit programming mode,
press the key. The LED indicator (2) will switch to constant
red to indicate that the code lock is in standby mode.
i) Deleting fingerprints or transponders using
user IDs
• The code lock must be in standby mode and the LED
indicator (2) must be red.
• Enable programming mode (see section 11 "Programming",
paragraph "b) Enabling/exiting programming mode"). The
36
