Sygonix 1527819, Руководство по эксплуатации, Страница: 48 / 120

• Press the OK button and then the ▲ or ▼ buttons to select “CAM” (image) or “VIDEO”.
• The LC display will show “CAM” or “VIDEO” depending on your selection. Press the OK
button select to “CAM” (image) or “VIDEO”.
Image resolution and multi-shot
• The LC display shows level “3” if you have selected “CAM” (image recording). Press the OK
button. Then press the ▲ or ▼ buttons to set the resolution.
• The LC display flashes the star icon to indicate the image resolution selection. Press
the OK button to make the image resolution setting.
• Press ▲ / ▼ to select an image resolution of 12 MP (3 stars), 8 MP (2 stars) or 5 MP (1 star).
Press the OK button to confirm your selection.
• The LC display shows level “4” (multi-shot and video length). Press the M button to exit the
menu or the OK button to set the number of consecutive shots.
• The LC display shows “1P” to “10P”. In PIR mode (motion detection), you can set between
1 and 10 consecutive shots. You can thus shoot up to 10 consecutive shots every time the
camera is triggered. Press ▲ or ▼ to select the number of consecutive shots.
• The current setting for the number of consecutive shots flashes on the LC display (e.g. 3P).
Confirm the selection by pressing the OK button.
• The LC display shows “5”. Select PIR or time lapse on this level. See section “Motion
detection (PIR) and time lapse”.
Set length of video recording
The maximum length of a video recording is 600 seconds. When PIR mode (motion detection)
is active, the camera records only as long as motion is detected to conserve memory space.
• If you select “VIDEO” on programming level “2”, the LC display shows “3”. The resolution
cannot be changed when recording video (720p). Press the ▼ button. The LC display shows
“4”. Press the OK button.
• Then press ▲ or ▼ to select a video length between “005” to “600”. The length of a video
recording can be set in increments of 5 per cent of 1 minute The maximum recording time is
6 minutes. Press the OK button to confirm the setting. The LC display shows “5” for the level
“Motion detection and time lapse”. Press the OK button.
• Press the M button to leave the area or the OK button to make settings for level “5”.
48