SYCLOPE ALTICE'O, Инструкции по связи

Страница: 6 / 28

Synoptics Page 6/28
Programming communication instructions
II. Synoptic of communication
The SYCLOPE ALTICE’O ® controllers have been created to be connected together to a
high tech supervisor in local or distant mode. Many controllers can be connected together
in different concepts.
1) Local connection with "AltiCom" maintenance software.
 Connection of one or more
SYCLOPE ALTICE’O
®
controllers via the RS485 BUS.
To connect your
SYCLOPE ALTICE’O
®
controller to your computer, we offer a USB / RS485
interface module.
Reference Designation
INF1021 USB 485 converter
2) Connection between SYCLOPE EVASION ® controller and OPTILIGHT ® probe.
 Connection to the SYCLOPE
ALTICE’O
® and one or two OPTILIGHT ® probes.
The « master » controller is able to drive one or two Optilight probes through the RS485
bus and to transfer pH and chlorine values to the probe for internal computations to
read a real value of cyanuric acid (stabilizing of chlorine).
Reference Designation
OPL1010 "OPTILIGHT" measuring probe Cyanuric Acid 0-100ppm
MODBUS MASTER MODBUS SLAVE MODBUS SLAVE MODBUS SLAVE
MODBUS MASTER MODBUS SLAVE
OTHER
MODBUS
SLAVE
SYCLOPE
MODBUS
SLAVE